Details

RC4WD Gelande II RTR D110 Truck Kit (Limited Edition)

£1,102.95 £1,132.95

PLEASE NOTE! SNORKLE AIR FILTER NO LONGER INCLUDED

The Ultimate D110 RTR Set Up, Pre Primed Body Very High Spec Model.

Tons Of Upgrades Included.

Hand Made Body.

ARB,WARN And ROCK KRAWLER Licenced Items.

Specifications:

  • Industrial Grade Heavy Duty Aluminum Chassis
  • 5 Lug Wagon 1.9 Steel Stamped Beadlock Wheels (Black)
  • Dirt Grabber 1.9" All Terrain Tires
  • Yota II Ultimate Scale Cast Axle
  • Long Wheelbase Gelande II Chassis "LWB"
  • Plastic Rod Ends
  • Full Ball Bearings
  • ARB Diff Cover
  • Punisher Shaft
  • Gelande Front Winch Bumper
  • Tough Armor Steel Side Sliders
  • Tough Armor Swing Away Tire Carrier w/Fuel holder
  • Adventure Land Rover Defender D110 Roof Rack
  • Heavy Duty Metal Servo Arm for Futaba Type Servo (Black)
  • RC4WD Outcry Crawler Water-Resistant Brushed Speed Control ESC Unit
  • 540 Crawler Brushed Motor 35TTwister High Performance Waterproof Servo
  • RC4WD 1/10 Warn 9.5cti Winch
  • RC4WD Wired Winch Control Unit
  • XR4 4-Channel 2.4Ghz Transmitter/Receiver Radio
  • ESC Input Voltage: 4.0V- 8.4V
  • BEC Output Voltage - Current: 5.75V-2A
  • Length: 22.91in / 582mm
  • Width: 8.7in /221mm
  • Height: 9.69in / 246mm
  • Wheelbase: 13in / 331mm
  • Weight: 169.67oz / 4.81kg

 What's Included:

  • 1x Gelande II RTR D110 Truck Kit (Limited Edition)


Notes:

  • Fits RC4WD Spare Tire Case For Defender Body (Z-X0012)
  • Fits RC4WD Spare Tires Case for Defender Body (Stamped w/RC4WD) (Z-X0010)
  • Requires body to be detailed and painted. Also, some assembly required


Needed Equipment to Complete:

  • 6 Cell NIMH Battery Pack with XT60 Connector.
  • AA Batteries for Radio
  • Charger for NIMH Battery


Build Time:

  • This truck will require some work to complete.
  • Prepping and painting the body
  • Some hardware may require threadlock.
  • Some gears may need to be lubricated.

Notes:

  • While some components may come assembled, it may be in your best interests to check the products to ensure all hardware is tight. In some cases you may want to apply threadlock to some of the hardware that is already installed.
  • Use good quality hex drivers to avoid stripping screw heads.
  • Use thread lock when putting metal screws into metal parts.
  • Steps marked with an asterisk (*) require thread lock.
  • Use thread lock sparingly.
  • Do not over tighten screws otherwise you may strip the thread.
  • Fits ARB Land Rover Defender 90 Winch Bar Front Bumper for Gelande 2 (Z-S0853) and RC4WD 1/10 Warn 9.5cti Winch (Z-S1079), but should work with RC4WD 1/10 Warn 9.5cti Winch CNC Mounting Plates (Z-S1168)


Replacement Parts:

  • Gelande II D110 Chassis Set (Z-C0043)
  • 129mm Aluminum Link (Black) (Z-S1146)
  • Metal Drive Extended Coupling (Z-S1148)
  • Scale Steel Punisher Shaft V3 (3.56"-4.35" / 90.5mm-110.5mm) 5mm Hole (Z-S0826)
  • Transfer Case and Lower 4 Link Mount for Gelande 2 Chassis (Z-U0027)
  • Servo Mounts for Gelande 2 Chassis (Z-S0791)
  • Front Shock Hoops for Gelande 2 Chassis (Z-S0798)
  • Rear Shock Hoops for Gelande 2 Chassis (Z-S0799)
  • Battery Plate for Gelande 2 (Z-S0792)
  • R3 Single Speed Transmission Mounts (Z-S0802)
  • Gelande 2 Aluminum Body Mounts (Z-S0790)
  • Tough Armor Swing Away Tire Carrier w/Fuel holder for the Gelande 2 (Z-S1296)
  • Tough Armor Steel Side Sliders for Gelande II (Z-S1166)
  • Metal Drive Coupling for Gelande 2 (Z-S0803)
  • 59mm (2.32") Aluminum Link for Gelande 2 (Z-S0807)
  • 65.3mm (2.57") Aluminum Link for Gelande 2 (Z-S0817)
  • 73mm (2.87") Aluminum Link for Gelande 2 (Z-S0805)
  • 70mm (2.75") Aluminum Link for Gelande 2 (Z-S0819)
  • Drag Link for Gelande 2 (Z-S0810)
  • Hammer Transfer Case (1.47/1) (Z-U0024)
  • 5 Lug Wagon 1.9 Steel Stamped Beadlock Wheels (Black) (Z-W0129)
  • Dirt Grabber 1.9" All Terrain Tires (Z-T0005)
  • Yota II Ultimate Scale Cast Axle (Front) (Z-A0080)
  • Yota II Ultimate Scale Cast Axle (Rear) (Z-A0081)
  • ARB Diff Cover For The Yota II Axle (Red) (Z-S1295)
  • RC4WD Rock Krawler RRD Emulsion Scale Dual Spring Shocks (90mm) (Z-D0052)
  • Gelande 2 Front 3 Link & Panhard Mount (Black) (Z-S0794)
  • Gelande 2 Rear 4 Link Mount (Z-S0795)
  • Fuel Cell Radio Box (Z-S0592)
  • 14t 32p Hardened Steel Pinion Gear (Z-S0430)
  • 1mm Black Spacer with M3 Hole (10) (Z-S0809)
  • 2mm Black Spacer with M3 Hole (10) (Z-S0600)
  • M3 Medium Straight Plastic Rod End (20x) (Z-S0399)
  • M3 Mini Plastic Rod End (20x) (Z-S0398)
  • M3 Offset Short Plastic Rod End (20x) (Z-S0401)
  • R3 Scale Single Speed Transmission (Z-U0028)
  • M3 Short Bent Plastic Rod End (20x) (Z-S0402)
  • Metal Shield Bearing 5x11x4mm (Z-S0683)
  • Adventure Land Rover Defender D110 Roof Rack (Z-C0032)
  • M4 Flanged Lock Nut (Black) (Z-S0620)
  • Heavy Duty Metal Servo Arm for Futaba Type Servo (Black) (Z-S0182)
  • 540 Crawler Brushed Motor 35T (Z-E0005)
  • Twister High Performance Waterproof Servo (Z-E0032)
  • RC4WD 1/10 Warn 9.5cti Winch (Z-S1079)
  • RC4WD Wired Winch Control Unit (Z-S1089)
  • XR4 4-Channel 2.4Ghz Transmitter/Receiver Radio (Z-R0006)
  • RC4WD Outcry Crawler Water-Resistant Brushed Speed Control ESC Unit (Z-E0068)


Optional Parts:

  • 1.9" 5 Lug Steel Wheel Hex Hub (Z-S0734)
  • 1.9 5 Lug Steel Wheel Hex Hub with Brake Rotor (Z-S0532)
  • Land Rover Disco Freestyle 1.9" Wheels (Gun Metal) (Z-W0037)
  • Scale Rear Hubs (Z-S0175)
  • Scale Aisin/Yota Style Hubs (Z-S0196)
  • XVD Axle for Ultimate Scale Yota II G2 Axle (Z-S0823)
  • Gelande 2 Steering Guard (Z-S0824)
  • Scale Steel Punisher Shaft V3 (3.56"-4.35" / 90.5mm-110.5mm) 5mm Hole (Z-S0826)
  • Ultra Scale Hardened Steel Driveshaft (1.81"/1.96"-46mm/50mm) 5mm (VVV-S0006)
  • Gelande Side Rock Sliders (Z-S0137)
  • RC4WD Marlin Crawlers Side Plastic Sliders for Trail Finder 2 (Z-S0596)
  • RC4WD Marlin Crawlers Side Metal Sliders for Trail Finder 2 (Z-S0753)
  • King Off-Road Scale Dual Spring Shocks (80mm) (Z-D0035)
  • #1 Aluminum Bumper Mount For Trail Finder 2 (Z-S0006)
  • Shock Hoops for Trail Finder 2 Chassis (Z-S0597)
  • Triton Transfer Case (1:1) (Z-U0029)
  • Optional Rear Bumper Mount for Gelande 2 (Z-S0993)
  • Yota II Scale Diff Cover (Z-S0907)
  • ARB Diff Cover For The Yota II Axle (Black) (Z-S1288)
  • ARB Land Rover Defender 90 Winch Bar Front Bumper for Gelande 2 (Z-S0853)
  • RC4WD 1/10 Warn 9.5cti Winch CNC Mounting Plates (Z-S1168)
  • XT60 Male to Tamiya Male Connector Adapter (Z-E0072)
  • RC4WD Rock Krawler Link kit for the Gelande 2 90/110 (Z-S1512)
  • Blade Snow Plow Mounting kit for Gelande 2 (Z-S1504)
  • Punisher Shaft II (80mm-100mm,3.15"-3.93") 5mm hole (Z-S1591)
  • RC4WD Bivouac 1/10 M.O.A.B Camping Trailer w/Tent (Z-H0007)
  • BigDog 1/10 Dual Axle Scale Boat Trailer (Z-H0006)


Notes:

  • Fits ARB Land Rover Defender 90 Winch Bar Front Bumper for Gelande 2 (Z-S0853) and RC4WD 1/10 Warn 9.5cti Winch (Z-S1079), but should work with RC4WD 1/10 Warn 9.5cti Winch CNC Mounting Plates (Z-S1168)
  • Interior fits D90. Its not long enough for the D110.
  • Custom install required by customer for D110.


Instruction Manuals:


ARB is a registered trademark of the ARB company. The ARB logo is property of ARB.
Warn and the Warn name are registered trademarks of Warn Industries. The Warn logo is property of Warn Industries.
Rock Krawler and the Rock Krawler logo are property of Rock Krawler Suspensions.