This is a set of aluminum mini servo mount (2) for the BRX01 chassis with a JX High Voltage Mini Servo Waterproof Core Metal Gear 4.5KG 0.08s @ 8.4V.
Designed to use with the DIG T-Case #BRLC70101-DIG and SWD (2WD/4WD) T-Case #BRLC70301-SWD. If you plan to run either the DIG or SWD transfer case, this set of mounts add one extra mini servo control unit for the new transfer case and moves the original mini servo position to the opposite side of the new mini servo mount.
This set of mini servo mounts replace the original mini servo mount for the BRX01 chassis.
Servo Specification:
Control system:
PWM control 1500 u-sec is the central point PWM control 1500 u-sec is the central point
Max Angle:180° Pulse width: 1000-2000μs=90° Pulse width: 500-2500μs=180° Dead band: 4μs 1520μs/330hz
Working voltage: 6V~8.4V
Working temperature: -20C°~ +60C°
Torque: 6V 3.5Kg/cm; 8.4v 4.5Kg/cm
Idle speed: 6V 0.12sec/60º; 8.4V 0.10sec/60º
Idle current: 6V 150mA; 8.4V 180mA
Load current: 6V 260mA; 8.4V 340mA
Dead band: 4usec
Lifetime: >15000 times without load
Moving angle: 60º±2°
Drive type: Mos drive
Motor type: Cored motor
Potentiameter type: Direct drive
Signal booster type: Digital
Size: 23.2x12.5x25.6mm
Weight: 15g
Ball bearing: no
Gear material: Metal gear
Case material: PA66+fiber40%
Wire length:310mm
Wire gauge No and plus type: 26AWG, JR plug
Black: Negative Red: Positive White: Signal
Includes:
Mini Servo Mount
Mini Servo - JX High Voltage Mini Servo Waterproof Core Metal Gear 4.5KG 0.08s @ 8.4V
