Details
RC4WD AX2 2 Speed Transmission for Axial Wraith & SCX10/Honcho SCX10 2
£105.95
AX2 2 Speed Transmission for Axial Wraith SCX10 And SCX10 2/Honcho
Fits SCX10 2 when the standard SCX10 centre transmission plate is used, this is supplied in the SCX10 2 kit version
Awsome Upgrade!! Ratios Are Spot On
Drive Shafts May Need Length Adjustment Depending On Your Setup !
Specifications
- CNC Machined Billet Aluminum
- Wraith / SCX10 direct fit
- 15T 32P Steel Pinion
- 60T 32P Delrin Spur
- Gear ratio Pinion / Spur ratio = 4:1
- 2 Speed
- Wide Steel 48 pitch internal gears
- 1st Gear Ratio = 5.05:1
- 2nd Gear Ratio = 1.78:1
- Slipper Clutch
- Shift Servo mount
- Compatible With Other Brand Pinions and Spur Gears
- Engineered by RC4WD UK
- Manufactured by RC4WD
- Output Shaft OD: 0.19" / 5mm
- Height: 2.6in / 66mm
- Length: 3.15in / 80mm
- Width: 4.8in / 121.7mm
- Weight: 8.71oz / 247g
What's Included
- 1 x AX2 2 Speed Transmission for Axial Wraith & SCX10/Honcho
- 1 x 15t 32p Hardened Steel Pinion Gear (Z-G0014)
- 1 x M3 x 15mm Set Screw (1 PCS from Z-S0650)
- 2 x Mini Plastic Rod End (2 PCS from Z-S0398)
- 5 x M3 x 10mm FHSC (Black) (Z-S0860)
- 4 x M3 x 8mm BHSC (Black) (Z-S0652)
- 2 x M3 x 12mm BHSC (Black) (Z-S0654)
- 1 x M3 x 3mm Set Screw (1 PCS from Z-S0124)
Replacement Parts:
- Uses 8x 5x11x4 Bearings (Z-S0683)
- Uses 2x 5x8x2.5 Bearings (Z-S0684)
- 60t Delrin Spur Gear for AX2 2 Speed Transmission (Z-G0048)
- Servo Mount for AX2 2 Speed Transmission (Z-S0509)
- Motor Mount for AX2 2 Speed Transmission (Z-S0703)
- Shifting Assembly for AX2 2 Speed Transmission (Z-S0043)
- Internal Gear Set for AX2 2 Speed Transmission (Z-G0057)
- Slipper Clutch Assembly for R3 and AX2 Transmissions (Z-S0704)
Optional Parts:
- Spur Gear Cover for AX2 (Z-U0033)
- M3 Short Straight Aluminum Rod Ends (Silver) (10) (Z-S1630)
- M3 Short Straight Aluminum Rod Ends (Red) (10) (Z-S1632)
- M3 Short Straight Aluminum Rod Ends (Blue) (10) (Z-S1634)
- M3 Short Straight Aluminum Rod Ends (Black) (10) (Z-S1636)
Optional Upgrade:
Notes:
- For best results you will need to remove the shifters from the Wraith interior.
- Put the servo on and attach the shift linkage.
- Install in Wraith. and refit the interior.
- Without pinion/spur, stock Axial tranny is 2.6:1
- For installation into the SCX10 line, you will need to customize your setup. Here are some details, this is just an example to help. Click Here
This product has been tested and approved by the Recon G6. It is Recon G6 Certified.
