Details
RC4WD King Off-Road Scale Dual Spring Shocks (90mm)
£46.95
RC4WD King Off-Road Scale Dual Spring Shocks (90mm)
These are the all new Licensed Scale Shocks to hit the market and are officially Licensed from King Off-Road Shocks. These new shocks feature a completely new design from the ground up and are built and ready to handle the rocks. Your scale build will never be the same once you bolt up a set of these awesome looking shocks!
Specifications:
- Machined Billet Aluminum
- King on Top and Retainer Ring
- Dual Spring Design
- Hole to Hole (Compressed): 2.59in / 66mm
- Hole to Hole (Uncompressed): 3.54in / 90mm
- Overall Length: 3.89in / 99mm
- Travel Length: 0.94in / 24mm
- Shock Body OD: 0.39in / 10mm
- Spring Body OD: 0.57in / 14.5mm
- Shaft Diameter: 0.17in / 3.5mm
- Weight: 0.9oz / 26g
Shown installed on Traxxas TRX4 with 2mm Black Spacer with M3 Hole (10) (Z-S0600) and 3mm Black Spacer with M3 Hole (10) (Z-S0806) for example (Not Included)
Installed on our customer's truck:
What's Included:
- 2x RC4WD King Off-Road Scale Dual Spring Shocks (90mm)
Replacement Parts:
Optional Parts:- Center Spring Retainer for King Offroad Shocks Z-S0706
- Lower Spring Retainer for King Offroad Shocks Z-S0707
- Shock Ball End for Bottom of King Offroad Shocks Z-S0708
- Replacement Shock Shafts for King Shocks (90mm) Z-S0785
- Shock Cap for Top of King Offroad Shocks Z-S0866
- Rebuild Kit for Scale King, ARB & Superlift Shocks Z-S0788
- 90mm King Scale Shock Spring Assortment (Z-S1119)
- Shock Cap for Top of King Offroad Shocks (Z-S0866)
Notes:
- Fits Gmade Sawback
- Fits Traxxas TRX-4, but will require both 2mm (Z-S0600) and 3mm (Z-S0806) Black Spacers with M3 Holes
- This product will fit the front of the Traxxas Telluride 4x4, but you will need 4x M3 x 14mm BHCS (Z-S0655)
- Fits Traxxas Rustler Front Axle, but you will need Steel Button Head Cap Screws M3 x 12mm (10) (Z-S0654)
- To use this shock with the SCX10 II, you will need to use a 3mm spacer on the top mounting point of the shock. (Z-S0806)
- Use blue (medium) thread lock to the bottom shock shaft rod end before installing onto your vehicle to help keep it in place.
This product has been tested and approved by the Recon G6. It is Recon G6 Certified.
